Bath Accessories
Chemglass Life Sciences 20L Bead Bath Only, 120V
20L Bead Bath Only, 120V. Bead bath gets up and running faster and you never need to turn it off. There is nothing to evaporate. It’s just like a trusty, always-on incubator. Unlike a standard bead-filled, water bath, Bead Bath allows you to achieve a new set temperature quickly, without long warm up delays, so you can make quick adjustments on the fly.With Bead Bath designed specifically for beads, temperatures are consistent and uniform everywhere in the bath. Thermal uniformity is an amazing ±0.5°C at 37°C and ±1.0 at 65°C.
Chemglass Life Sciences 2L Lab Armor Beads
2L Lab Armor Beads. These dry metallic beads replace water in water baths, aluminum blocks in dry baths, ice in ice buckets, and give old equipment a cool, shiny, state-of-the-art look while maintaining temperatures of -20°C to 8°C for 4 or more hours. Open sources of water in the lab can put the lab at risk if incubating and spreading biological or chemical contamination between samples, equipment and people. Unknown biological and chemical contamination in water can readily enter your incubating samples resulting in distorted data and non-reproducible results. Lab Armor™ bead technology will save you countless hours of reworking ruined experiments and eliminate cleaning. Lab Armor™ Beads extend the life of your bath by eliminating corrosion and reducing burn-out risk.For best performance, use product at an operating temperature of -80 to 180°C. However, product may be used up to 300°C without loss in thermal performance, but product fluidity may be reduced.
Neta Scientific Quick-Connect Heat-Exchanger 1290 Bio Standard Flow
This item is manufactured by Agilent
Quick-Connect Heat-Exchanger 1290 Bio Standard Flow
Perkin Elmer US LLC ICP-OES Chiller Coolant Mix, 1/2 Gallon Bottle - Qty. 5
The Chiller Coolant Mix for ICP-MS instruments (WE016558) is available separately.
USA Scientific Inc ThinCert 3 micron trans insert
ThinCert 3 um translucent insert for 6-well plates, individually wrapped, 24/pack. Includes 4 plates with lids.
USA Scientific Inc ThinCert 3 micron trans insert
ThinCert 3 um transparent insert for 6-well plates, individually wrapped, 24/pack. Includes 4 plates with lids.
Chemglass Life Sciences 8L Lab Armor Beads, Shipped in (2) 4L Containers
8L Bath Armor (shipped in 2 x 4L containers)
Chemglass Life Sciences CoolCube Microtube and Microplate Cooler
CoolCube Microtube and Microplate Cooler. The CoolCube is designed to store samples safely on the lab bench without sample degradation due to temperature increase or fluctuation. Constructed of DuraStar (a high strength polymer) and a patented gel refrigerant, the CoolCube maintains temperature at approximately 0¿C for up to four hours. Simply place the CoolCube in a freezer overnight and it¿s ready for use, keeping samples cool and safe at the bench, without messy ice buckets or wet tubes. One side of the Benchmark CoolCube can be used as a convenient PCR workstation with wells for 12 standard 1.5/2.0mL microtubes and one 96 well PCR plate or 0.2mL tubes/strips. The other side can be used to hold 36 standard 1.5/2.0mL microtubes.
Julabo USA Inc Each, 0.5m triple insulated metal tubing, M16x1f fittings
Bath Accessories, Julabo, Metal Tubing Triple insulated (-100°C…+350°C), 0.5 m Metal tubing with connector M16x1 female fittings
Julabo USA Inc Each, 1.5m single insulated metal tubing, M16x1f fittings
Bath Accessories, Julabo, Metal Tubing Single-Insulated 1.5m (-50°C…+200°C) with M16x1 female fittings
Julabo USA Inc Each, 1m triple insulated metal tubing, M16x1f fittings
Bath Accessories, Julabo, Metal Tubing Triple insulated (-100°C…+350°C), 1 m Metal tubing with connector M16x1 female fittings
Julabo USA Inc 1m tubing insulation for use with 1" ID reinforced tubing
Bath Accessories, Julabo, Insulation, 35 mm inner diameter for textile-reinforced tubing 1" inner diameter. Priced per meter.
Julabo USA Inc Set, extra spring clamps for 8970630. Use with SW22/SW23 shaking water baths.
Bath Accessories, Julabo, Spring clamps set for basic tray 8970630. Set including 12 spring clamps 135 mm and 5 spring clamps 190 mm length. Additional springs. For use with shaking water bath models SW22, SW23.
Julabo USA Inc Pair, M16x1 male to 3/4" FNPT adapters
Bath Accessories, Julabo, Adapter NPT 3/4" female to M16x1 male, pair.
Julabo USA Inc Pair, 10mm hose barb adapters
Bath Accessories, Julabo, Adapter barbed, for 10mm ID tubing, pair (for CD/CP/DD/MS/MX, HE/HL, SE/SL). Requires M16x1 female nut to install.